Affiliate disclosure: I sometimes use vendor & product links that can pay me a small monetary commission if you click them and/or make a purchase. Learn more about this. As an Amazon Associate I earn from qualifying purchases.

Wednesday, August 3, 2011

LEGO Hero Factory how-to: Villain heads on 3.0 heroes

You asked for it, here it is.  My how-to showing the technique I used to affix Fangz and Waspix / Scorpio heads to my Boravus 3.0 and Lennick 3.0 MOCs.  Savage Planet villain heads as Hero Factory hero helmets may look pretty good, but the technique itself ain't good at all!  Works for display, but not play.  Good enough for photos, overview videos and basic stop motions, but not for regular use.

Now ya know!

10 comments:

  1. Oh, that makes sense. I never even noticed the rubber band in the videos!

    ReplyDelete
  2. Great technique, very helpful as I have Fangz but couldn't figure out how to use the head, thanks.

    ReplyDelete
  3. YiKes Jang i have something to tell you something. I was looking for rocka 2.0 pics and on google almost EVERY pic is yours! Watermark and everything. Don't know if you care but just so you know.

    ReplyDelete
  4. I was going to say that I have independently discovered a way to add savage planet creature heads onto Hero Factory heads, with two Exo-Force robot arms. You would insert the part normally inserted into the arm into the two holes in the top of the head. Then, after this is done, you can get the clips at the end of the hands to grab onto the pegs on the savage planet creature head. It does not seem to work well with Raw-Jaw, as he has some plastic on the undersides of his eyes that get in the way, but it seems to work with the others fine.

    ReplyDelete
  5. You could have use the bushing and the "t" piece as i call them

    ReplyDelete
  6. @ Jacob H Johnson
    I discovered that too when the sets came out. I also noted that this works with WD heads too.

    ReplyDelete
  7. how do you attach raw jaws head?

    ReplyDelete
  8. You can't with a Hero head.But you CAN do it with a #3 armor piece.

    ReplyDelete
  9. HOW DID YOU ATTACH THE RAW-JAW HEAD THEN?

    ReplyDelete
  10. A #3 Armor Piece, Anonymous 25674981.

    ReplyDelete